TDS 10 Electric Fan Heater

Out of Stock

The TDS 10 electric heater provides stages a heating performance between 0.65 kW and 2 kW in 3 stages at an emitted air volume of 186 m³/h. Furthermore the TDS 10 has an integrated thermostat and an integrated connection cable.

In comparison to direct fired gas or oil heaters, the electric fan heaters of the TDS series don’t consume oxygen and produce combustion gases. Because of that this devices can be used everywhere, especially for temperature controls unheated interiors.

The possibility of wall mounting or installation under the ceiling opens a wide range of applications, e.g. for heating of building container, marketplaces, greenhouses, small storages, garages, workshops, boathouses or at installation applications.

Thanks to the integrated thermostat control, the produced warm air flow can be adjusted continuously to the desired temperature at all TDS models.

The thermostat controlled heating elements of the TDS 10 switch on the permanent fan, if needed.

 

Benefits in pratice:

  • Multistage temperature control with up to 3 heating stages
  • Integrated room thermostat for constant, cosy warmth
  • Overheat protection
  • Fan motor with thermal protection
  • Condensation-free heating – no oxygen consumption – because of that the TDS 10 is suitable for uses in enclosed rooms
  • Wall and ceiling bracket available – mounting is available as an accessory

Fields of application:

  • Building container
  • Garages
  • Gastronomy
  • Greenhouses
  • Marketplaces
  • Storerooms and workshops
  • Boathouses
  • Workshops
  • Shipbuilding
  • and many more

Technical data:

  • Heating performance stage 1: 0.65 kW
  • Heating performance stage 2: 1.3 kW
  • Heating performance stage 3: 2 kW (max. 1,720 kcal)
  • Air flow rate: 186 m³/h
  • Fan stages: 1
  • Power: 8.7 A
  • Mains voltage: 230 V / 50 Hz
  • Power connector: Schuko-plug / CEE 7/7
  • Connection cable: integrated (length 1.4m)
  • Thermostat: integrated
  • Mobility: portable
  • Noise level: 46 dB (A)
  • Overheat protect: existing
  • Protection type: IPX4
  • Length: 198 mm
  • Width: 210 mm
  • Height: 320 mm
  • Weight: 3.7 kg