The TwinFresh Comfo RA1 user-friendly ventilator is the most suitable solution for small rooms. Supply of clean and fresh air 24 hours a day.
ADVANTAGES
- Simple mounting – you need only to mount it, plug into a socket and use!
- High efficiency – up to 85%.
- The unit properly operates at temperature range up to -20 °C.
- Can be mounted inside a prepared hole (from ∅ 100 mm) in a wall.
- Integrated humidity sensor for the automated unit operation.
- Simple ventilator control.
- Automatic drafts shutoff by shutters when the ventilator is off.
- Noise at the level of subdued conversation (22-33 dBA).
- Ventilation of premises with the area of about 15 m2(the area is approximate and depends on the ventilation standards in your country)
- Night mode. The ventilator switches to low speed in the dark time of the day (by a light sensor).
SIMPLE
Control using the buttons on the front panel or remote control.
Energy efficient DC fan is a recipe for silence and energy saving.
NO DRAFTS
Closed air shutters prevent drafts when the ventilator is switched off.
The simple operation logic of the regenerator will provide clean and fresh air in your house.
CARING
Clean and fresh air 24 hours a day.
Manual control has never been so easy!
Operation modes:
– Night mode
The integrated light sensor sends a signal to switch the ventilator to low speed mode.
– Speed switching
– Passive air supply
The automatic shutters are opened but the fans are off in this mode.
– Air supply
In this mode all ventilators will operate in supply mode irrespective of the maximum air supply setting.
– Ventilation
All the ventilators in the network operate in permanent air extract or air supply mode. To ensure balanced ventilation it is advisable to set one half of the ventilators to air supply mode and the other part of the ventilators to air extract mode.
– Ventilation with heat recovery
– Humidity control mode selection
Technical Data
Parameter | VENTS TwinFresh Comfo RA1-25-14 1 Speed | VENTS TwinFresh Comfo RA1-25-14 2 Speed | VENTS TwinFresh Comfo RA1-25-14 3 Speed | Measurement unit |
---|---|---|---|---|
Speed | 1 | 2 | 3 | – |
Power consumption | 3.5 | 3.95 | 5.32 | W |
Voltage | 100-240 | V | ||
Frequency | 50/60 | Hz | ||
Current | 0.023 | 0.026 | 0.036 | A |
SFP | 3.6 | 1.9 | 1.6 | W/l/s |
Air flow in ventilation mode | 7 | 15 | 24 | m³/h |
Air flow in ventilation mode | 2 | 4 | 7 | l/s |
Air flow in energy recovery mode | 4 | 8 | 12 | m³/h |
Air flow in energy recovery mode | 1 | 2 | 3 | l/s |
Filter | G3 | – | ||
Shutters | automatic | – | ||
SEC Class | A | – | ||
Transported air temperature | -20 … +40 | °С | ||
Sound pressure level at 1 m distance | 31 | 35 | 43 | dBА |
Sound pressure level at 3 m distance | 22 | 25 | 33 | dBА |
Outdoor sound pressure attenuation according to DIN EN 20140 | 40 | dBА | ||
Heat recovery efficiency according to DIBt LÜ-A 20 | ≤ 85 | % | ||
IP Code | IP 24 | – | ||
Functions | Filter replacement indication, Timer, Humidity sensor | – | ||
Remote control panel | – | – | ||
Duct | 100 |
Downloads
Сatalogue “Single-room energy recovery units TwinFresh”
Installation instruction “Outer ventilation hood with frost protection EH-13”